计量管理责任事故处理2

《计量管理责任事故处理2》由会员上传分享，免费在线阅读，更多相关内容在工程资料-天天文库。

1、厦门恩比尔车件有限公司XIAMBMMBLC0MP0NEN1SC0.LTD文件名称HieName文件编号fileNoQA-JL-WI001文件管制章标识DocumentControlMark计量器具爭故〕ProposalofforMisopMeasuringA责任处理规定Responsibilityerationofpparatus版木号EditionNo.第一版Edition1页码PageNo更改次数limesofChange年月日Date更改内容ContentofChange更改理由Rea90nforChange起案CompiledBy确认ConfirmedBy批准ApprovedBy0X

2、新制定Newlycompiled严生标Yan9nengBiao1•目的Purpose为加强计量器具的维护、保管，防止人为的损伤丢失，影响牛产，特制定本规定。Inordertoimprovethemaintenanee,keepingandavoidanydamageorlossofmeasuringapparatus,whichallwillinfluenceourproduction,westipulatethisregulation.2•范围Validity2.1.凡因计量室器具使用、保管不善造成损伤、损坏、丢失，均属责任事故，其责任人应负责赔偿。Therelatedpersonnels

3、halltaketheresponsibility,ifhe/shedamage,loseanymeasuringapparatusbecauseofmisuseandbadkeeping.2.2.凡共用计量器具应明确其保管人，对难以追查事故直接责任者，保管人应承担责任。Iftwopeopleusethemeasuringapparatusatmeantime,theyshallfigureoutthekeeper.Ifanymisoperationhappensanditisdifficulttofindthedirectresponsibleperson,thekeepershallta

4、keresponsibility.2.3•凡止常使用产生的自然损耗，失准，报废，或其它非人为原因引起的损坏，不属责任事故。Naturalworn-out,inaccuracy,scrapping,orotherdamagecausedbynonhumanreasonarenotmisoperations.3•权责AuthorityandResponsibity3.1•发生计量器具责任事故时，责任者应主动，及时向计量室报告，不得隐瞒或推卸责任。Ifanymisoperationhappens,theresponsiblepersonshallreporttoCalibrationRoomact

5、ivelyandcan'thideorrejecttheresponsibility.3.2.il量室负责对计暈器具责任事故进行调查，作出止确判断。其调查判断工作不应受他人干预。CalibrationRoomshallinspectmisoperationsofmeasuringapparatusandmakecorrectjudgement.Theinspectionandjudgementcannotbeintervenedbyothers.3.3•计量室对计量器具责任事故，根据其损伤程度提出赔偿意见,报QA经理室审批。CalibrationRoomforwardsthecompensa

6、tionsuggest!ontoQAmanageraccordingtothedamageofmeasuringapparatus.3.4.行政人事部根据审批结果，负责赔偿决定的执行。HRadministrationcarriesoutthecompensationdecisionaccordingtotheapproval.4•有关保管的规定RegulationofKeeping4.1.®共同使用的计量器具，应建立借用登记手续，防止无法查明该事故责任者。Forthosemeasuringapparatusthatareusedbymorethanoneperson,usersshallma

7、keborrowregister.Otherwisewecan'tfindouttheresponsiblepersonifanymisoperationhappens.4.2.固定安装于设备上的器具，设备操作人员负责维护保管。Machineoperatorshalltakecareoftheapparatusthatarefixedonthemachine.4.3•禁止涂改计量器具上的编号、标志；禁止私3调