DSP-F2812-SPI数模转换例程.docx

《DSP-F2812-SPI数模转换例程.docx》由会员上传分享，免费在线阅读，更多相关内容在工程资料-天天文库。

1、__________________________________________________/**************************************注意开SPI的时钟！！！！2011年10月29日9:44:52DA芯片是TLV5620，数据线和时钟都是用SPI的，LOAD线用GPIOA15来控制！*******************************************/#include"DSP28_Device.h"voidGpio_select(void);voidspi_init(void);voidd

2、ac_load(charchannel,intvalue);interruptvoidcpu_timer0_isr(void);voidmain(void){Uint16voltage=0;/*初始化系统*/InitSysCtrl();/*关中断*/DINT;IER=0x0000;IFR=0x0000;//清中断____________________________________________________________________________________________________/*初始化PIE*/InitPieCtrl

3、();/*初始化PIE中断矢量表*/InitPieVectTable();Gpio_select();spi_init();EALLOW;PieVectTable.TINT0=&cpu_timer0_isr;EDIS;InitCpuTimers();ConfigCpuTimer(&CpuTimer0,120,1000);PieCtrl.PIEIER1.bit.INTx7=1;IER

4、=M_INT1;EINT;ERTM;CpuTimer0Regs.TCR.bit.TSS=0;for(;;){while(CpuTimer0.InterruptCount<

5、3);CpuTimer0.InterruptCount=0;dac_load(0,voltage);if(voltage++>255)____________________________________________________________________________________________________voltage=0;}}voidGpio_select(void){EALLOW;GpioMuxRegs.GPFMUX.bit.SPICLKA_GPIOF2=1;GpioMuxRegs.GPFMUX.bit.SPISIMO

6、A_GPIOF0=1;GpioMuxRegs.GPADIR.bit.GPIOA15=1;GpioDataRegs.GPASET.bit.GPIOA15=1;EDIS;}voidspi_init(void){SpiaRegs.SPICCR.all=0x0000;//spiswreset=0;SpiaRegs.SPICTL.bit.CLK_PHASE=1;//设置clockphase，输出早于输入SpiaRegs.SPICTL.bit.MASTER_SLAVE=1;SpiaRegs.SPICTL.bit.TALK=1;SpiaRegs.SPIBRR=0x

7、001d;//30M/(29____________________________________________________________________________________________________+1)=1MHZSpiaRegs.SPICCR.all=0x00ca;//spiswreset=1;clockpolarity=1;}interruptvoidcpu_timer0_isr(void){CpuTimer0.InterruptCount++;PieCtrl.PIEACK.all=PIEACK_GROUP1;}vo

8、iddac_load(charchannel,intvalue){SpiaRegs.SPICCR.bit.RESET=1;//准备发送SpiaRegs.SPITXBUF=value<<5;//因为是11位数据,要保证左对齐需左移5位while(SpiaRegs.SPISTS.bit.INT_FLAG==0);SpiaRegs.SPICCR.bit.RESET=0;//清标志GpioDataRegs.GPACLEAR.bit.GPIOA15=1;asm("rpt#500

9、

10、nop");GpioDataRegs.GPASET.bit.GPIOA15=1;

11、}__________________________________________________