土木工程施工课程设计汇本完整版

《土木工程施工课程设计汇本完整版》由会员上传分享，免费在线阅读，更多相关内容在教育资源-天天文库。

1、土木工程施工课程设计专业：姓名：班级：学号：导师：时间：目录第一章工程概况····················································1一、建筑、结构概况···············································1二、施工条件概况·················································1第二章工程量计算··················································一、土方工程量·············

2、·······································二、基础工程工程量················································三、柱工程量······················································四、梁工程量······················································五、楼梯工程量····················································六、预制板工程量

3、··················································七、工程量清单表··················································第三章施工方案····················································一、施工段划分····················································二、工期控制···················································

4、···三、施工顺序······················································四、施工工艺······················································五、施工方法·····················································六、施工时间·····················································七、模板方案····································

5、·················第四章机械设备选择················································第五章主要技术措施················································第六章施工总平面图··············································第七章施工进度计划表···········································第一章工程概况一、建筑、结构概况建筑设计特点：本工程为某无线电厂生产车间，总体呈矩形分布

6、，建筑物总高16.90m，总长54.30m，总宽21.3m；共四层，首层层高为4.5m，二、三标准层层高均为4.2m，顶层层高4.0m，屋顶为平屋顶。结构设计特点：本工程采用钢筋混凝土框架结构，框架柱统一截面尺寸为400mm×450mm，梁截面300mm×400mm、300mm×500mm和300mm×600mm等，楼面铺设180mm厚预应力钢筋混凝土空心板。采用柱下独立基础，尺寸均为2050mm×2050mm，阶梯形；基础埋深为2.0m，下设100厚混凝土垫层；采用现浇混凝土板式楼梯；室外设计地坪标高为-0.45m。二、施工条件概况地形：平坦土质：亚粘土雨季

7、：4-6月份地下水位：最高地下水位位于地面以下2.0m开工时间：2016年7月8日施工工期：275天（根据施工定额）钢筋：由加工厂加工成型后运至现场。混凝土：采用商品混凝土，水电由市区供应。交通：厂内可通行车辆材料：建筑材料齐全，技术力量雄厚，劳动力由公司工程处统一调配。第二章工程量计算根据施工段的划分原则，每层分两个施工段，分界线在5号轴线柱右侧。取1~5轴基础层为第1施工段，6~10轴基础层为第2施工段，其他层依次类推。一、土方工程量根据土的类别取基坑放坡系数为0.5。基础尺寸：2.05m×2.05m。下底：(四周考虑0.3m的工作面)。上底：。采用机械挖

8、土，考虑到基坑开挖尺寸及运输车辆的进出