《罐区工程监理》word版

《《罐区工程监理》word版》由会员上传分享，免费在线阅读，更多相关内容在应用文档-天天文库。

1、11化工罐区工程监理实施细则（储罐安装工程）目录1.编制依据·······················································12.工程概况························································13.监理工作流程···········································3图3.1开工准备阶段质量控制流程图，·····························4图3.2施工阶段质量控制流程图，·································

2、·5图3.3交工验收阶段质量控制流程图，······························64.工程质量控制原则和要点·········································74.1工程质量控制原则···············································8114.2工程质量控制要点···············································85.工程质量控制方法和措施·········································85.1工程质量控制方法······

3、········································85.2工程质量检测方法···············································85.3工程质量控制措施···············································95.4罐主体预制、安装施工准备阶段监理控制程序·······················105.5罐主体预制施工监理控制具体程序···································115.6罐主体安装施工监理控制具体程序··················

4、··············11罐主体工程关键工序和重要部位控制点表·························126.监理工作控制目标··············································137.工程进度控制和流程············································14图7.1工程进度监理控制流程图······································15111.编制依据1.1上海赛科SECCO90万吨/年乙烯工程球罐和储罐工程《监理规划》；1.2上海市安装工程有限公司《化工罐区安装工程

5、施工组织设计》和《储罐制作安装施工方案》；1.3依据GB/T19001—2000ISO9001：2000《质量管理体系—要求》编制的公司质量管理体系文件；1.4设计施工图及有关设计文件；1.5国家和行业现行有关标准、规范：（1）《建筑工程施工质量验收统一标准》GB50300-2001（2）《建设工程监理规范》GB50319-2000（3）《立式圆筒形钢制焊接油罐施工验收规范》GBJ128-90（4）《石油化工设备和管道涂料防腐技术规范》SH3022-1999（5）《现场设备、工艺管线焊接工程施工及验收规范》GB50236-98（6）《石油化工立式圆筒钢制焊接储罐施工工艺标准》SH3530-

6、93（7）《压力容器无损检测》JB4730-941.6上海赛科SECCO的《施工质量规则》等有关标准和规定。2.工程概况2.1工程概述上海赛科石油化工有限公司90万吨/年乙烯界外工程（0SBL）化工罐区2共有各类储罐28台，最大容积13000m3，最小100m3，另为10000m3、7000m3、5000m3、4000m3、3000m3、1000m3等不同容积。罐区储存的介质类别较多，有粗裂解汽油、丙烯氰、甲苯、硫酸、液碱等十几种介质。罐体材料均为碳素钢板，75-TK-0118粗裂解油罐下面3圈壁板和罐底边缘板为20R材料，其余为Q235-A材料。罐体均为拱顶结构，其中6台内设铝浮顶，15

7、台设内浮盘。本储罐工程共有2家施工单位，75-TK-0103丙烯氰A/B2台10000m3储罐由中石化四公司承建，另外27台由上海市安装工程有限公司承建。由于储罐规格差别较大，上海市安装工程有限公司针对不同容积采用不同施工工艺，4000m3及以上采用液压顶升倒装工艺，1000m3-3000m3容积的采用多点桅杆提升倒装工艺，小于1000m3的采用吊车正装工艺施工。2.2工程主要实物量11工程主要实物量一览表序号工程位号储