a101-203-02后制动器-鼓式

《a101-203-02后制动器-鼓式》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、203-02-1鼓式制动器203-02-1203-02章节鼓式制动器适用车型:长安.奔奔MINI目录页码规格规格203-02-2说明与操作鼓式制动器203-02-3诊断和测试鼓式制动器203-02-4拆卸和安装制动鼓(12 275 0)203-02-05制动蹄(12 285 0)203-02-07长安·奔奔MINI206-02-XXXDrumBrake206-02-XXXSPECIFICATIONS(Continued)润滑脂、油液、密封剂和粘接剂名称名称型号制动液HZY4鼓式制动器规格mm新制动鼓直径180制动鼓报废直径182制动蹄片宽度30制动分泵孔直径

2、17.46（ABS）15.87（非ABS）新制动蹄衬片厚度4.5制动蹄衬片报废厚度1.5*当制动鼓直径达到报废标准时，必须更换制动鼓。当制动鼓未达到报废标准而对制动鼓进行加工时必须特别小心。扭矩规格描述Nm轮毂固定螺母220轮胎螺母85制动分泵固定螺栓10制动硬管接头15G109101en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXDESCRIPTIONANDOPERATION(Continued)DESCRIPTIONANDOPERATION鼓式制动器G109098en09/20022003.50Fie

3、sta206-02-XXXDrumBrake206-02-XXXDESCRIPTIONANDOPERATION(Continued)G109098en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXDESCRIPTIONANDOPERATION(Continued)G109098en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXDESCRIPTIONANDOPERATION(Continued)DAGNOSISANDTESTING编号零件号名称1底板2制动分

4、泵3制动蹄片4制动鼓DESCRIPTIONANDOPERATIONG109098en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXDIAGNOSISANDTESTING(Continued)DIAGNOSISANDTESTING鼓式制动器G17465en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXDIAGNOSISANDTESTING(Continued)G17465en09/20022003.50Fiesta206-02-XXXDrumBrake206

5、-02-XXXDIAGNOSISANDTESTING(Continued)相关信息请参阅203-00节。G17465en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXREMOVALANDINSTALLATION(Continued)REMOVALANDINSTALLATION制动鼓(12 275 0)G109099en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXREMOVALANDINSTALLATION(Continued)G109099en09/20

6、022003.50Fiesta206-02-XXXDrumBrake206-02-XXXREMOVALANDINSTALLATION(Continued)拆卸1.拆卸驻车制动控制杆饰板，相关信息请参阅501-05节。2.放下驻车制动控制杆并松开调整螺母。3.松开车轮螺母。4.举升汽车。相关信息请参阅100-01节。5.拆卸车轮。6.小心:如果润滑脂帽密封盖损坏，安装时更换。拆卸润滑脂密封盖。7.松开制动鼓固定螺母。拆卸制动鼓。1.拆卸螺母。2.拆卸制动鼓。安装小心:只要轮毂固定螺母拧紧后，就不允许再去松动。如果要求进行扭矩调整，则必须将此螺母松开两圈后再拧紧

7、。1.按与拆卸顺序相反的步骤安装。G109099en09/20022003.50Fiesta206-02-XXXDrumBrake206-02-XXXREMOVALANDINSTALLATION(Continued)2.调整驻车制动拉索。相关信息请参阅203-03节。G109099en09/20022003.50Fiesta203-02-XXX鼓式制动器203-02-XXX拆卸和安装(续)制动蹄(12 285 0)203-02-XXX鼓式制动器203-02-XXX拆卸和安装(续)名称型号润滑脂SAM1C-9107-A拆卸1.拆卸制动鼓轮毂总成。相关信息请参阅

8、本节制动鼓部分。2.拆卸制动蹄固定弹簧。3.用橡皮带