汽水油系统阀门清单

《汽水油系统阀门清单》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、汽水、油系统设备阀门清单序号名称型号数量备注1主汽及本体系统电动隔离汽门T940H—64PN6.4DN1501有2全部阀门配双法兰及垫片和紧固件疏水门J41H—64PN6.4DN253轴封进汽门J41H—64PN6.4DN252汽封来气门J41H—40PN40DN151有汽封泄气门J41H—16PN4.0DN321有汽封调节门J41H—25PN2.5DN501导汽管疏水门J41H—40PN4.0DN202本体疏水门J41H—16PN1.6DN155疏水箱空气门Z41H—25PN2.5DN1001针

2、型阀J23W—10PN1.0DN10102软化水系统纯水泵进水门J41H—16PN1.6DN652纯水泵出水门J41H—16PN1.6DN502纯水泵出水逆止门H41HPN1.6DN502针型阀J13W—10PN1.0DN101就地压力表软化水补水门Z41H—16CPN1.6DN502有一台3凝结水系统凝结泵进水门Z41H—16CPN1.6DN802有凝结泵出水门Z41H—16CPN1.6DN652出口逆止门H41HPN1.6DN652汽平衡门Z41H—16CPN1.6DN202密封水门Z41H—

3、16CPN1.6DN102再循环调节门T940H—16PN1.6DN32140调节门代替凝结水母管调节门Z41H—16CPN1.6DN651针型阀J13W—10PN1.0DN1015取样阀Z41H—16PN1.6DN1014射水抽气系统凝汽器空气门Z41H—16CPN1.6DN1002空气总门Z41H—16CPN1.6DN1501射水泵进水门Z41H—16CPN1.6DN1252射水泵出水门Z41H—16CPN1.6DN1002有出口逆止门H41HPN1.6DN1002真空破坏门Z41H—16CP

4、N1.6DN651射水箱补水门Z41H—16CPN1.6DN651射水箱排污门Z41H—16CPN1.0DN801有针型阀J23W—10PN1.0DN1065循环水系统循环泵进水门D343H—10CPN1.0DN3002循环泵出水门D343H—10CPN1.0DN3002循环泵逆止门PN1.0DN3002凝汽器进水门D343H—10CPN1.0DN3002凝汽器出水门D343H—10CPN1.0DN3002放空气门Z41H—10CPN1.0DN206射水箱补水门Z41H—10CPN1.0DN801

5、有射水箱工业补水门Z41H—10CPN1.0DN801有循环水泵软连接橡胶PN1.0DN3002冷却塔软连接橡胶PN1.0DN2504冷却塔阀门D343H-10PN1.0DN2504至冷油器总门Z41H—10CPN1.0DN1001有至空冷器总门Z41H—10CPN1.0DN1001有空冷器回水总门Z41H—10CPN1.0DN1001冷油器工业水门Z41H—10CPN1.0DN651冷油器进出口水门Z41H—10CPN1.0DN1004空冷器工业水门Z41H—10CPN1.0DN651空冷器进出

6、水门Z41H—10CPN1.0DN656有循环水取样阀Z41H—16PN1.6DN102针型阀J23W—10PN1.0DN10256油系统电动油泵进口门Z41H—16PN1.6DN1001电动油泵出口门Z41H—16PN1.6DN1001直流油泵进口门Z41H—10PN1.0DN401止回阀H41HPN1.6DN1001H41HPN1.6DN401冷油器进出油门Z41H—10PN1.0DN1004滤油器进出阀Z41H—10PN1.0DN1002油箱底部放水阀Z41H—10PN1.0DN401针型阀

7、J23W—10PN1.0DN10257给水系统给水调节门T940H—16PN6.4DN50140代替减温水调节门T940H—16PN6.4DN25140代替PN4.0给水手动门DKZ41/YPN6.4DN503给水泵进水门Z41H—16CPN1.6DN802有给水泵出水门DKZ41/YPN6.4DN502给水泵出口逆止门HQ41XPN6.4DN5021给水再循环门J41H—64PN6.4DN202针型阀J63W—1568工业水系统工业泵进水阀门Z41H—16PN1.6DN802有工业泵出水逆止阀门

8、HQ41XPN1.6DN502有PN1.0带工业泵出水门Z41H—16PN1.6DN502消防栓阀消防专用阀210锅炉系统针型阀J63W-151511冲压弯头DN150159*81012Crmo冲压弯头DN300325*67个Q325冲压弯头DN100108*512个Q325冲压弯头DN5057*55个20G冲压弯头DN6578*426个Q325冲压弯头DN5057*3.525个Q325冲压弯头DN250273*54个Q325冲压弯头DN10089*45个Q325