欢迎来到天天文库
浏览记录
ID:5452506
大小:1.16 MB
页数:43页
时间:2017-12-13
《usb电池充电器下端盖的注射模设计毕业设计》由会员上传分享,免费在线阅读,更多相关内容在学术论文-天天文库。
1、上海第二工业大学本科毕业设计(论文)本科毕业设计(论文)题目:USB电池充电器下端盖的注射模设计院系:机电工程学院专业:机械工程及自动化班级:学号:姓名:指导教师:完成日期:2013年4月26日上海第二工业大学本科毕业设计(论文)USB电池充电器下端盖的注射模设计摘要本文主要介绍的是USB电池充电器下端盖的注塑模具设计方法。首先分析了USB电池充电器下端盖制件的工艺特点,包括材料性能、成型特性与条件、结构工艺性等,并选择了成型设备。接着介绍了USB电池充电器下端盖注塑模的分型面的选择、型腔数目的确定及布置,重点介绍了浇注系统、成型零件、侧向分型抽芯机构、联合推出机构以及冷却系统的设计
2、。然后选择标准模架和模具材料,并对注射机的工艺参数进行相关校核,充分考虑到模具零件的加工可行性。最后对模具的工作原理进行阐述,以及在安装调试过程中可能出现的问题进行总结、分析,并给出了相应的解决方法。本文论述的USB电池充电器的注塑模具,采用三板式结构,即浇注系统凝料和制件在不同的分型面脱出,采用一模四腔的型腔布置,最后利用推杆和推管共同将制件推出。关键词:注射模设计;充电器下端盖;点浇口;侧向分型抽芯机构;联合推出机构上海第二工业大学本科毕业设计(论文)ThemouldinjectiondesignofchargershellAbstractThedesigningmethodso
3、finjectionmouldofthechargershellaremainlyintroducedinthispaper.First,thetechnologicalcharacteristicsareanalyzed,includingmaterialproperties,formingcharacteristicsandconditions,theprocessofthestructure,theformingequipmentisselected.Thenthepartinglineisselected,thenumberofcavitiesisdetermined.The
4、specificintroductionaremadeongatingsystem,coolingsystem,moldingparts,steeringmechanism,moldingmechanism,andspacerpartinginstitutions.ThenthestandardmouldbasesandMouldmaterialsareselected,andthetechnologicalparametersoftheformingequipmentischecked.Finally,problemsthatmayemergeduringthemoldinstal
5、lationprocessareanalyzedandtheappropriatesolutionsareprovided.Pointgateisusedonthedesignofchargershell,thatispouringmaterialandtheplasticpartsareejectedfromdifferentpartinglines.therearefourcavitiesinthismould,finallyastripperplateisusedtopushoffthechargershells.Keyword:Injectionmolddesign;Char
6、geronthecover;Pointgate;Sidepartingcore-pullingmechanism;Jointlylaunchedinstitutions;上海第二工业大学本科毕业设计(论文)目录摘要Abstract第一章绪论...............................................11.1选题的依据及意义..............................................11.2国内外研究现状及发展趋势......................................1第二章任务设计要求......
7、.................................5第三章塑件工艺性分析.....................................63.1材料性能分析..................................................63.2成型特性和工艺条件............................................63.3结构工艺性分析.....................
此文档下载收益归作者所有