欢迎来到天天文库
浏览记录
ID:52393772
大小:673.75 KB
页数:5页
时间:2020-03-27
《长石粉对酚醛树脂基摩擦材料性能的影响.pdf》由会员上传分享,免费在线阅读,更多相关内容在行业资料-天天文库。
1、第44卷,第2期工程塑料应用Vo1.44,No.212016年2月ENGINEERINGPLASTICSAPPLICATIONFeb.2016doi:lO.3969~.issn.1001-3539.2016.02.003长石粉对酚醛树脂基摩擦材料性能的影响舟陈霞,梅启林,张景洁,孟盼,范珊珊(武汉理工大学材料科学与工程学院,武汉430070)摘要:采用热压成型工艺制备混杂纤维增强酚醛树脂基摩擦材料,在定速式摩擦试验机和万能试验机上研究了不同长石粉含量对材料摩擦磨损性能和力学性能的影响,借助扫描电子显微镜观察磨损表面形貌并分析其磨损机理。结果表明,长石粉的加入对材料的力学性能有明显
2、改善,相比于无长石粉的材料,当长石粉质量分数为6%时,材料的弯曲强度、压缩强度、剪切强度和冲击强度和洛氏硬度分别提高17.76%,10.62%,15.75%,7.81%和5.24%,但密度降低6.34%。且长石粉质量分数为6%时摩擦材料摩擦磨损性能最佳,100℃时的摩擦系数高达0.51,且磨损率最低,为1.2X10cm/(N-m);其磨损机制从200~(3时的粘着磨损转变为300℃时的典型磨粒磨损。关键词:长石粉;混杂纤维增强酚醛树脂;摩擦材料;摩擦磨损性能;力学性能;磨损机理中图分类号:THll7.1文献标识码:A文章编号:1001.3539(2016)02.0013.05Ef
3、fectsofFeldsparPowderonPropertiesofPhenolicResinMatrixFrictionMaterialsChenXia,MeiQilin,ZhangJingjie,MengPan,FanShanshan(SchoolofMaterialsScienceandEngineering,WuhanUniversityofTechnology,Wuhan430070,China)Abstract:Thefrictionmaterialsbasedonhybridfiberreinforcedphenolicresinmatrixwereprepare
4、dbyheat—pressmoldingprocess.Theeffectsofthecontentoffeldsparpowderonthetribologicalperformanceandmechanicalprope~ieswerestudiedbyconstantspeedtypefrictiontesteranduniversaltestingmachine.Thewearmorphologywasobservedusingscanningelectronmicroscopy,andthewearmechanismwasanalyzed.Resultsshowthat
5、theadditionoffeldsparpowderimprovesthematerialmechanicalperformancesignificantly.Whenthemassfractionoffeldsparpowderis6%,thebendingstrength,compressionstrength,shearstrength,impactstrengthandRockwellhardnessareincreasedby17.76%,10.62%,15.75%,7.81%and5.24%respectively,aswellasthedensityisdecre
6、asedby6.34%,comparedwithnofeldsparpowdermateria1.Atthesametime。thetribologicalpropertiesofthefrictionmaterialswith6%offeldsparpowderarethebest.thefrictioncoeficientisashighas0.51atIO0~Candthewearrateisthelowestwhichis1.2x10cm/(N‘m).Thewearmechanismchangesfromadhesivewearat200~Ctotypicalabrasi
7、vewearat300oC.Keywords:feldsparpowder;hybridfiberreinforcedphenolicresin;frictionmaterial;tribologicalperformance;mechanicalproperty;wearmechanism摩擦材料广泛应用于汽车、火车、飞机等交通常用的增摩剂有ZrSiO4,ZrO2,A120和SiC,其莫工具的制动器和离合器摩擦片上[1】,是非常重要的氏硬度高达79,属于高硬度材料,容易加剧对偶
此文档下载收益归作者所有