gbt 18607-2001 抽油泵及其组件规范

《gbt 18607-2001 抽油泵及其组件规范》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、ICS75-180.10E92中华人民共和国国家标准Gs/Z'18607-2001抽油泵及其组件规范Specificationforsubsurfacesuckerrodpumpsandfittings2001门2一30发布2002一08一01实施中华人民共和国发布国家质量监督检验检疫总局GB/T18607-2001目次前言·，·····。············，·············。··。··。············，·。····················。···········。····。···。··········“⋯⋯血API前言·

2、·························，·········‘·········，·····，·.................................................1V1范围··············*······，···，·····························，.··········，···1···“·⋯⋯I2引用标准···············，’····，·‘·················，········，····‘·····“，*‘t··“·，.二13抽油泵代号·········

3、，··”··············‘····，·。。····················，···········“·····“····⋯⋯14设计控制·.......................................................................................................⋯35抽油泵总成...........................................................................................

4、.................36抽油泵零件······················。·························。···············································一157测量、试验和校验··，··...................···········1·····，，···，···，.··········‘············⋯⋯488标志·······，····“·‘·····”··········，.·····“···‘····‘..................·

5、·‘······”·······“····“⋯50s材料·，·‘·‘。········‘，’······‘···f········‘·······“，········‘····”············“···‘·””⋯5110螺纹连接······‘·，·，.·‘····。·················‘··························，，····，.·················⋯⋯53附录A(标准的附录)金属柱塞与泵筒的配合间隙························。···················。····

6、····⋯⋯64附录BC标准的附录)配合间隙最大漏失量推荐值············。·······································。·⋯⋯64附录C(标准的附录)泵总成密封性能试验压力推荐值··········。·······，···········，··········一65GB/T18607-2001前言本标准等效采用APTSpec11AX:1996《抽油泵及其组件规范》第10版。本标准在等效采用APTSpec11AX;199"抽油泵及其组件规范李第10版时，增加了附录A"金属柱塞与泵筒的配合间隙”，附录B“配合间隙最

7、大漏失量推荐值”，附录C"泵总成密封性能试验压力推荐值”三个标准的附录。取消了原标准中的专门说明及对授权使用APT会标的厂家的标记要求的附录。等效采用APTSpecIIAX:1996为本行业标准时，除采用了该标准的全文外，沿用了其编写格式与方法。增加了本标准前言。本标准对APTSpecIIAX:1996(第10版)标准中存在的个别疑误，在转化为本行业标准时，进行了更正，并在相应之处采用了更正性脚注进行了说明。通过等效采用APTSpecIIAX:1996，使我国油气开采的重要设备—抽油泵标准与国外先进标准接轨，以适应国际贸易、技术和经济交流及参加国际标准化活

8、动的需要.本标准自实施之日起，同时代替SY/T5059-1991《