[专题]跨交换机的VLAN配置实验.doc

《[专题]跨交换机的VLAN配置实验.doc》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、vlandatabase这条命令，cisco已经不推荐使用这个命令了，现在要创建vlan的话直接在conft下打vlan就OK了跨交换机的VLAN配置实验SW1:添加VLANSW1#vlandatabaseSW1(vlan)#vlan10VLAN10added:   Name:VLAN0010SW1(vlan)#vlan20VLAN20added:   Name:VLAN0020SW1(vlan)#vlan30VLAN30added:   Name:VLAN0030SW1(vlan)#vlan40VLAN40added:   Name:VLAN0040SW1

2、(vlan)#vlan50VLAN50added:   Name:VLAN0050SW1(vlan)#exitAPPLYcompleted.Exiting....SW1#showvlan-swbriefVLANName                            Status   Ports----------------------------------------------------------------------------1   default                         active   Fa0/0,Fa0/

3、1,Fa0/2,Fa0/3                                               Fa0/4,Fa0/5,Fa0/6,Fa0/7                                               Fa0/8,Fa0/9,Fa0/10,Fa0/11                                               Fa0/12,Fa0/13,Fa0/14,Fa0/1510  VLAN0010                        active   20  VLAN

4、0020                        active   30  VLAN0030                        active   40  VLAN0040                        active   50  VLAN0050                        active   1002fddi-default                    active   1003token-ring-default              active   1004fddinet-default 

5、                active   1005trnet-default                   active设置中继并配置以太通道捆绑SW1#conftEnterconfigurationcommands,oneperline. EndwithCNTL/Z.SW1(config)#interfacerangefastethernet0/1-4SW1(config-if-range)#switchportmodetrunk*Mar 101:12:29.463:%DTP-5-TRUNKPORTON:PortFa0/1-4hasbecom

6、edot1qtrunkSW1(config-if-range)#switchporttrunkencapsulationdot1qSW1(config-if-range)#channel-group1modeonCreatingaport-channelinterfacePort-channel1SW1(config-if-range)#*Mar 101:12:45.775:%EC-5-BUNDLE:InterfaceFa0/1joinedport-channelPo1*Mar 101:12:45.991:%EC-5-BUNDLE:InterfaceFa0/

7、2joinedport-channelPo1*Mar 101:12:46.159:%EC-5-BUNDLE:InterfaceFa0/3joinedport-channelPo1*Mar 101:12:46.339:%EC-5-BUNDLE:InterfaceFa0/4joinedport-channelPo1*Mar 101:12:48.487:%LINEPROTO-5-UPDOWN:LineprotocolonInterfacePort-channel1,changedstatetoupSW1(config-if-range)#intrangef0/5-

8、8SW1(config-if-range)#swit