吊篮专项施工方案.docx

《吊篮专项施工方案.docx》由会员上传分享，免费在线阅读，更多相关内容在工程资料-天天文库。

1、电动吊篮专项施工方案编制人：审核人：审批人：建元超宇装饰集团有限公司海口分公司目录一．编制依据·········································································3二．工程概况·········································································3三．施工准备·······································································

2、3四．选用电动吊篮的型号及组成部件说明···································4五．吊篮设备主要技术性能参数················································4六．吊篮设备整机结构简介······················································5七．电动吊篮设备的安装、移位和拆除方案······························8八．吊篮设备的调试··································

3、·······················16九．吊篮设备的电气安装调试规程··········································16十．吊篮设备使用说明··························································17十一.吊篮设备的安全检查与维护保养·····································18十二.吊篮设备施工中的应急处理······································21十三.吊篮设备的易损件··

4、····················································23十四.安全保证措施····························································23十五.吊篮设备季节性施工措施············································25十六.常见吊篮设备故障分析及处理······································25十七.机械吊篮设备相关的计算书······················

5、···················27十八.吊篮设备自检表·························································29一．编制依据1、GB3811-83中华人民共和国《高处作业吊篮标准》2、GB6067-85中华人民共和国《起重机安全规程》3、JG/T5032-93《高处作业吊篮》4、JG5027-92《高处作业吊篮安全规则》5、JG5034-93中华人民共和国《高处作业吊篮用安全锁》6、JG5033-93中华人民共和国《高处作业吊篮用提升机》7、GB5972-86《起重机用钢丝绳检验和报

6、废使用规范》8、JG/T5025-1992《高处作业吊篮性能试验方法》9、GB19155-2003中华人民共和国《高处作业吊篮》二．工程概况本工程位于海南省海南省海口市滨海大道256号。楼层总高43.8米。建筑总面积：14165.50㎡（地上）；建筑高度：43.2m；幕墙起始标高：-0.450m，最高标高：43.8m；建筑主体结构形式：钢筋混凝土框架结构；预计使用吊篮25台。三．施工准备(1)、使用方必须在建筑物内外预备380V电源。(2)、为了减少往楼顶搬运吊篮配件的劳动强度，提高安装速度，有塔吊或升降设备的应给予配合。(3)、建筑物顶部或架设悬挂

7、机构的场地具备基本平整条件，此平台必须牢固、稳定，符合楼顶安装平台的条件。已做防水保护层的，准备木板若干，以加强成品的保护。(4)、建筑物顶部有其它杂物的应清理干净，便于安装或移动。由于电动吊篮移动方便、灵活、使用效率高，没有其它特许要求。(5)、专人负责搬运、安装、移机及吊篮的拆卸。(6)、搬运：水平搬运包括平台、绳坠块、电器系统；垂直搬运包括屋面悬挂装置、钢丝绳、配重块。四．选用电动吊篮的型号及组成部件说明根据屋顶吊篮安装环境，选用ZLP-630型电动吊篮。型号：ZLP-630长度：6.0米载重分别为：630公斤ZLP-630型电动吊篮组成部件：

8、提升机（LTD6.3）2台；安全锁（LS20）2把；电控箱1套；悬挂支架2套；工作平台1套；钢丝绳（4×25