欢迎来到天天文库
浏览记录
ID:55271373
大小:27.77 KB
页数:27页
时间:2020-05-08
《思科、华为、H3C常用命令对比大全.docx》由会员上传分享,免费在线阅读,更多相关内容在工程资料-天天文库。
1、思科、华为、H3C常用命令对比大全思科、华为、H3C这些网络设备的命令还是挺多的,不过我们一般用的路由交换机设备都是最简单的了,先学基本命令,再学其他功能命令。路由命令是最基本的命令了。思科、华为、H3C常用命令对比大全 CISCO H3C HUAWEI 描述 no undo undo 取消、关闭当前设置 show display display 显示查看 exit quit quit 退回上级 hostname sysname sysname 设置主机名 en,co
2、nfigterminal system-view system-view 进入全局模式 delete delete delete 删除文件 reload reboot reboot 重启 write save save 保存当前配置 username local-user local-user 创建用户 shutdown shutdown shutdown 禁止、关闭端口 showversion displayversion displayversion
3、显示当前系统版本 showstartup-config display saved-configuration display saved-configuration 查看已保存过的配置 showrunning-config display current-configuration display current-configuration 显示当前配置 nodebugall ctrl+d ctrl+d 取消所有debug命令 erasestartup-config resets
4、aved-configuration resetsaved-configuration 删除配置 end return return 退到用户视图 exit logout logout 登出 logging info-center info-center 指定信息中心配置信息 line user-interface user-interface 进入线路配置(用户接口)模式 start-config saved-configuration saved-configur
5、ation 启动配置 running-config current-configuration current-configuration 当前配置 host iphost iphost host名字和ip地址对应 交换部分 enablepassword setauthentication passwordsimple setauthentication passwordsimple 配置明文密码 interfacetype/number interfacetype/numbe
6、r interfacetype/number 进入接口 interfacevlan1 interfacevlan1 interfacevlan1 进入vlan配置vlan管理地址 interfacerang interfaceethIDtoID interfaceethIDtoID 定议多个端口的组 enablesecret superpassword superpassword 设置特权口令 duplex(half
7、full
8、auto) duplex(half
9、full
10、au
11、to) duplex(half
12、full
13、auto) 配置接口状态 speed(10/100/1000) speed(10/100/1000) speed(10/100/1000) 配置端口速率 switchportmodetrunk portlink-typetrunk portlink-typetrunk 配置trunk vlanID/novlanID vlanbatchID/undovlanbatchID vlanbatchID/undovlanbatchID 添加、删除vl
14、an switchportaccess vlan portdefaultvlanID portaccesvlanID 将端口接入vlan showinterface displayinterface displayinterface 查看接口 showvlanID displayvlanID displayvlanID 查看vlan encapsulation link-
此文档下载收益归作者所有