世纪网通语音网关cng系列命令控制手册

《世纪网通语音网关cng系列命令控制手册》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、世纪网通语音网关cng系列命令控制手册世纪网通语音网关cng系列命令控制手册世纪网通CNG系列常用配置基本参数设置:Login:rootPassword:centnetCentnetCos[SoftwareVersionV03.01.r4.330ForCNG3004FXS]Copyright(C)By1999-2004CentnetTechnologiesCo..LtdAllrightsreserved.Centnet>conPleaseinputthePassword:(密码为空)Centnet/Con

2、f>sup(超级管理员登陆)PleaseinputthePassword:(密码为szcentnet)Centnet/Conf>e0(设置10M端口)Centnet/Conf/E0>ip***.***.***.***255.255.255.***(设置IP地址和子网掩码)Centnet/Conf/E0>quitCentnet/Conf>routeadddef***.***.***.***(设置路由地址或网关地址)Centnet/Conf>wr(写入FLASH闪存)Centnet/Conf>h323Cent

3、net/Conf/H323>gk***.***.***.***(设置gkip)Centnet/Conf/H323>h323id********(设置h323id)Centnet/Conf/H323>quCentnet/Conf>wrCentnet/Conf>diat(设置拨号规则)Centnet/Conf/DialT>quCentnet/Conf>wrCentnet/Conf>lin(设置各端口参数)Centnet/Conf/LineALL>predelt(删除被叫号码)Centnet/Conf/Line

4、ALL>preadd******(加入被叫号码)Centnet/Conf/LineALL>num******(设置主叫号码)Centnet/Conf/LineALL>ter(设置为终端模式)Centnet/Conf/LineALL>dis(打开来电显示)Centnet/Conf/LineALL>quCentnet/Conf>wr恢复出厂设置命令：Centnet/Conf>setdefault重起网关命令:Centnet/Conf>reboot用E穿模式注册网守：如果已经用GK注册网守,先去除GK命令,Ce

5、ntnet/Conf/H323>nogkCentnet/Conf>easy***.***.***.***如果注册平台需要E.164值Centnet/Conf/H323>alias*******(此处为主叫号码的值)免区号设置(郑州):Centnet/Conf>dia0tCentnet/Conf/Dial0T>quCentnet/Conf>diatCentnet/Conf/DialT>pre+0371Centnet/Conf/DialT>quCentnet/Conf>wr网关内部互打：1.先给每个端口设置号

6、码Centnet/Conf>linCentnet/Conf/LineAll>predelt(出厂值每个端口被叫号码都为T,如果存在一定要删除,如果已经删除过,这两步可以省略)Centnet/Conf>lin0Centnet/Conf/Line0>preadd99000Centnet/Conf/Line0>quCentnet/Conf>lin1Centnet/Conf/Line1>preadd99001Centnet/Conf/Line1>quCentnet/Conf>lin2Centnet/Conf/Li

7、ne2>preadd99002Centnet/Conf/Line2>quCentnet/Conf>lin3Centnet/Conf/Line3>preadd99003Centnet/Conf/Line3>quCentnet/Conf>wr2.加映射本地的拨号规则Centnet/Conf>dia99tCentnet/Conf/Dial99T>map127.0.0.1Centnet/Conf/Dial99T>quCentnet/Conf>wr配合多路计费器使用，打开反极信号Centnet/Conf/LineA

8、ll>invertcheck设置PPPOE拨号连网Centnet/Conf/E0>pppoe帐号密码打开/关闭路由功能Centnet/Conf/E0/Nat>start/stop修改声音的增益问题：回音调制1.如果本地听到对方声音小Centnet/Conf/LineAll>ivd**(默认32)2.如果对方听到本地声音小Centnet/Conf/LineAll>ovd**(默认32)音量调制1.如果本地听到对方声音小Centn