FANUC_0-TD数控车床编程实例

《FANUC_0-TD数控车床编程实例》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、FANUC0-TD数控车床编程实例2007-04-1821:19如图示：O0002；O机能指定程序号。N10T0101；N20S500M03；主轴正转。N30G00X45Z2；到毛坯外。N40G71U1.5R1；与N50一起根据轮廓段组N60-N140自动分配切削参数进行粗车循环，U为吃刀量，R为退刀量，均为半径值。N50G71P60Q140U0.5W0.2F0.3；P为轮廓开始段号，Q为轮廓结束段号，U为X向精加工余量（直径值），W为Z向精加工余量N60G01X18Z0；轮廓开始。N80X20Z－1；N90Z－28；N100X27.368Z－45.042；点A。N110G03X25.019

2、Z－54.286R14；点B。N120G02X26.806Z－60.985R6；点C。N130G03X36Z－73R18；N140G01Z－85；N150G70P60Q140S1100F0.05；N160G00X50Z60；远离工件，准备换刀。N170T0202；换割刀。割刀刀宽4mmN180S200M03；割槽时，要求低转速。N200G00X22Z－28；准备割第一刀。N210G01X16F0.03；割第一刀。N220G04P1000；停留1S。N230G00X22；退刀。N240Z－24；准备割第二刀。N250G01X16F0.03；割第二刀。N260G04P1000；停留1S。N270

3、G00X22；退刀。N280Z－21；准备用右刀尖割倒角。N290G01X16Z－24F0.1；用右刀尖割倒角。N300G00X50；N310Z60；N320T0303；N330S300M03；降低转速以切螺纹。N340G00X22Z－23；准备切螺纹的第一线。N350G92X19.2Z3F3；切螺纹，导程3。N360X18.7；N370X18.3；N380X18.05；N390G00X22Z－24.5；准备切螺纹的第二线。N400G92X19.2Z3F3；N410X18.7；N420X18.3；N430X18.05；N440G00X50；N450Z60；N470T0202；N480S200

4、M03；N490G00X38Z－84；准备割断。N500G01X0F0.03；割断。N520G00X50；N525Z0；停在工件右端面，方便第二个工件的加工。N530M05；N540M30；返回程序头O0235；N1T0101；N2G00X40.0Z0；N3M03S800N4G71U2.0R0.5；N5G71P6Q12X0.5Z10.0F10；N6G00X24.0Z5.0；N7G01U-0.5S100F5；N8W-15.0；N9G02R10W-15.0；N10G01X28.9Z42.0；N11G03R18.0Z-60.9692；N12G01Z-70.0；N13G00X100.0；N14Z80

5、.0；N15M05M30；%；华中系统数控车床编程实例和FANUC0-TD数控车床编程实例比较%0001N1T0101N2G00X40Z2N3M03S800N4G71U2R1P5Q11X0.5Z0F10N5G00X24Z5N6G01U-0.5F10N7W-15N8G02R10W-15N9G01X28.9Z42N10G03R18Z-60.9692N11G01Z-70N12G00X100N13Z80N14M05M30