TBT2597-2005 机车车辆车轮检查器_.pdf

《TBT2597-2005 机车车辆车轮检查器_.pdf》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、rcs45.060ss9TB中华人民共和国铁道行业标准TB/T2597-2005代替TB/T1360-1980,TB/T1361-1980,TB/T2597-1996机车车辆车轮检查器Wheel-checkerforrailwaylocomotiveandvehicle2005-03-29发布2005-07-01实施中华少味民共和国铁道部发布www.bzfxw.comTB/T2597-2005目次前言···················································

2、·························································⋯⋯II1范围·..............................................................................................................1，妇规范性引用文件···········。························································

3、··························⋯⋯1内J结构形式·································································································，····⋯⋯1d技术要求········································································································⋯⋯2户

4、勺试验方法····················。···················································································⋯⋯3‘U检验方法·······································································································⋯⋯4月检验规则························

5、·················································································⋯⋯4卜舀标志与包装······································································································⋯⋯4www.bzfxw.comTB/T2597-2005前言本标准代替TB/T1360-1980+机车车轮检查器》,T

6、B/-F1361-1980《车辆车轮检查器》和TB/'r2597-1996《机车、车辆车轮检查器技术条件》，与TB/T1360-1980,TB/T1361-1980,TB/T2597-1996相比，主要变化如下:—规定了测量轮缘厚度时应以车轮踏面基点为测量基准;—取消了有关测量锥形轮缘踏面车轮的技术要求;—取消了车轮检查器的所有零部件制造图，仅给出了典型的结构形式示意图;—规定了车轮检查器的各测量尺的示值误差;—增加了有关电子数显类车轮检查器方面的技术要求;—增加了车轮检查器的试验方法和检验方法等内容

7、。本标准由中国南车集团戚墅堰机车车辆工艺研究所提出并归口。本标准起草单位:中国南车集团戚墅堰机车车辆工艺研究所、铁道部标准计量研究所、哈尔滨铁路局计量管理中心。本标准主要起草人:蒋田芳、王彦春、付德利。本标准所代替标准的历次版本发布情况为:-TB/T1360-1980(机车车轮检查器》;一—TB/T1361-1980+车辆车轮检查器》;-TB/T2597-1996《机车、车辆车轮检查器技术条件》。www.bzfxw.comTB/T2597-2006机车车辆车轮检查器，范围本标准规定了机车车辆车轮检查器

8、(以下简称检查器)的结构形式、技术要求、试验方法、检验规则及标志、包装等。本标准适用于静态接触式测量机车车辆车轮轮缘和踏面有关尺寸的游标类检查器和数显类检查器。其他测量装置可参照使用。2规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件，其最新版本适用于本标准。GB