GBT19912-2005 轮胎式集装箱门式起重机安全规程 - 下载地址.pdf

《GBT19912-2005 轮胎式集装箱门式起重机安全规程 - 下载地址.pdf》由会员上传分享，免费在线阅读，更多相关内容在应用文档-天天文库。

1、ICS53020.20R46中华人民共和国国家标准GB/T19912-2005轮胎式集装箱门式起重机安全规程Safetycodefortherubber-tyredgantrycrane2005-09-14发布2006-04-01实施.www.bzxzk.com中华人民共和国国家质量监督检验检疫总局发布中国国家标准化管理委员会.GBIT19912-2005目次前言············，·····。·，·，·······································。，，·································，，。·····

2、·，··，，·⋯⋯山1范围···············。。。。··················，‘······4·，，。。。···························‘，·····················，·⋯12规范性引用文件···，···········，··················。···。‘·，·································。···。，，，············⋯⋯13基本要求，······，，，·································，，，·。··。，，，，····

3、··········，·············，·。·，······⋯⋯14主要零部件·。····，，，，····················。··············。。·，，，，，，·····························。····，·········⋯⋯15金属结构········。····。·，·，··················，······················，·····································，，，，···⋯⋯36电气系统，·················。，，，·····

4、········，·····················，····，，，····································，，·一37安全保护装置。，，，，，····································，。。··。，，，·························，，··········。，······，··⋯⋯38安装与试验······。·········，·································，。······，································。·。·

5、··，，，⋯⋯49使用与保养···‘······，，，···········，·····，···，······、·····················，··········，，，二’4···，，，，，一410操纵系统················，·····，·，·································，·，。··。··，，，·······················，········。··，，，，411检验与维修·················，·，，·，·，，，··························，】·】·····

6、···································⋯⋯4.www.bzxzk.com.GB/T19912-2005前言本标准参照ISO4309:199N起重机械用钢丝绳检验和报废实用规范》,BS7121:1989《起重机安全使用实用规范》与欧洲搬运工程协会标准FEMsect.1:1987(起重机械设计规范》等标准制定的。本标准由中华人民共和国交通部提出。本标准由交通部水运科学研究所归口。本标准起草单位:交通部水运科学研究所、上海港机股份有限公司、上海国际港务(集团)有限公司、广州港务(集团)有限公司、华南理工大学。本标准主要起草人;饶京川、桂寿平、谢深

7、、莫晓明、陆范宜、宋延俊。.www.bzxzk.com.GB/T19912-2005轮胎式集装箱门式起重机安全规程范围本标准规定了轮胎式集装箱门式起重机(以下简称起重机)在设计、制造、安装试验、使用保养、维修与检验等方面的安全技术要求。本标准适用于装卸GB/T1413规定的1AA,lA,1CC,1C型国际奥装箱的材重机2规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的