Code Composer Studio 教 程

《Code Composer Studio 教 程》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、PhoenixTreeSkyCodeComposerStudio教程EditedbyPhoenixTreeSchoolofAutomationBeijingInstituteofTechnology2014.09.090PhoenixTreeSkyCONTENTSCodeComposerStudio教程（一）——开发一个简单的程序......................................4步骤1：创建一个新项目...........................................................

2、.................................4步骤2：在项目中加载源文件.....................................................................................4步骤3：浏览源代码....................................................................................................4步骤4：建立并运行程序.....................

3、.......................................................................4步骤5：改变程序设置并修改语法错误......................................................................4步骤6：使用断点和观察窗口.....................................................................................5步骤7：用Watchwindow

4、观察指令...........................................................................6步骤8：代码执行时间的性能分析..............................................................................6CodeComposerStudio教程（二）——开发一个DSP/BIOS程序.................................8步骤1：创建一个配置文件................

5、.........................................................................8步骤2：加载DSP/BIOS文件到项目中.........................................................................9步骤3：用CCS来进行测试.......................................................................................10步骤4：D

6、SP/BIOS代码执行时间的性能分析.............................................................10步骤5：试一试.........................................................................................................11步骤6：释放性能分析所占用的资源：...............................................................

7、.....12CodeComposerStudio教程（三）——从文件中测试算法和数据.............................131PhoenixTreeSky步骤1：打开并检测项目..........................................................................................13步骤2：观察源代码..........................................................................

8、........................13步骤3：为文件I/O加一探针点（probepoint）......................