欢迎来到天天文库
浏览记录
ID:40054628
大小:2.21 MB
页数:20页
时间:2019-07-18
《《报告者谢圣尉》ppt课件》由会员上传分享,免费在线阅读,更多相关内容在教育资源-天天文库。
1、SurfacemodificationsofAl–Zn–MgalloyusingcombinedEDMwithultrasonicmachiningandadditionofTiCparticlesintothedielectric報告者:謝聖尉日期:98年1月8號1IntroductionExperimentalmethodsResultsanddiscussionConclusions2IntroductionEDM的特點對一般而言,(MRR),因此相關的技術表面改性不僅改變了加工表面,但也促進了
2、加工效率。在1991之後陸續有人開始在EDM中加入超音波振動來進行實驗。本研究的綜合加工和超聲波馬達作為組合機,加工鋁鋅鎂合金,以促進加工性能,並對材料移除率、電極損耗比率、表面粗糙度和加工精度等探討。3Experimentalmethods1/44Experimentalmethods2/45Experimentalmethods3/46Experimentalmethods4/47EPMA(電子探針顯微分析儀)微克斯硬度試驗機Falex6號研磨機Influenceofmachiningproces
3、sonMRR8InfluenceofmachiningprocessonREWR9Influenceofmachiningprocessonsurfaceroughness1/310Influenceofmachiningprocessonsurfaceroughness2/311Influenceofmachiningprocessonsurfaceroughness3/312Influenceofmachiningprocessonexpansionofmachinedhole13Influenc
4、eofmachiningprocessonthecompositionofthemachinedsurface1/214Influenceofmachiningprocessonthecompositionofthemachinedsurface2/215Influenceofmachiningprocessonmicrohardness16Influenceofmachiningprocessonwearresistance1/217Influenceofmachiningprocessonwe
5、arresistance1/218Conclusions隨著放電電流的增加,EDM+USM的MRR大於EDM。REWR合併進程超過了傳統的電火花加工在低峰值電流。然而,在一個很高的峰值電流,REWR合併進程明顯低於常規電火花加工。EDM+USM的表面粗糙度優於EDM。EDM+USM造成擴孔的現象比EDM來的小的,且有更好的加工精度。加入TiC,EDM+USM使Ti和C滲入表面來的好,且有較好的合金表面。合併進程產生了硬化層附近的加工表面,與傳統的電火花,這產生了軟化層,因為當地的高溫進行軟化加工區。因
6、此,合併進程的加工表面改性,並改進了其耐磨性。19Thankyouforattention20
此文档下载收益归作者所有