plc设计全自动洗衣机梯形图和语句表

《plc设计全自动洗衣机梯形图和语句表》由会员上传分享，免费在线阅读，更多相关内容在应用文档-天天文库。

1、.............Network1系统启停和手动停止LDI0.0OM0.0ANC20..ANI0.1ANT46=M0.0Network2启动/停止LDI0.0LDC20CTUC20,2Network3进水LDM0.0ANI0.2ANQ0.3ANQ0.4ANQ0.5=Q0.0Network4强/弱洗选择LDI0.3LDC30CTUC30,2Network5强/弱洗控制LDI0.3OM0.1ANC30=M0.1Network6强洗正转8sLDNM0.1ANT40AI0.2LPSANM0.3=M0.2LPPTONT37,80Ne

2、twork7强洗正转暂停2sLDT37=M0.3TONT38,20Network8强洗反转8s..LDT38LPSANM0.5=M0.4LPPTONT39,80Network9强洗反转暂停2sLDT39=M0.5TONT40,20Network10强洗循环判断LDNM0.1AT40LDC40CTUC40,4Network11弱洗正转2sLDM0.1ANT44LPSANM0.7=M0.6LPPTONT41,20Network12弱洗暂停5sLDT41=M0.7TONT42,50Network13弱洗反转2sLDT42LPSANM1.

3、1=M1.0LPPTONT43,20Network14弱洗反转暂停5sLDT43=M1.1TONT44,50..Network15弱洗循环判断LDM0.1AT44LDC50CTUC50,2Network16排水LDI0.4OC40OC50OQ0.3ANI0.1ANT45=Q0.3Network17脱水LDI0.5AQ0.3ANT45=Q0.4=M1.2Network18脱水计时10sLDQ0.4TONT45,100Network19大循环判断LDT45LDC60CTUC60,3Network20报警LDC60OQ0.5ANT46A

4、NI0.1=Q0.5Network21报警计时10sLDQ0.5TONT46,100Network22LDM0.2..OM0.6OM1.2=Q0.1Network23LDM0.4OM1.0=Q0.2ENDI/O分配表输入输出序号主令I序号对象Q1启/停按钮SF2I0.01进水电磁阀MB1Q0.02停止按钮SF3I0.12洗衣机正转接触器QA1Q0.13高水位开关BG1I0.23洗衣机反转接触器QA2Q0.24强/弱洗按钮SF1I0.34排水电磁阀MB2Q0.35低水位开关BG2I0.45脱水电磁离合器Q0.46手动排水开关SF4I

5、0.56报警蜂鸣器PBQ0.5..初始状态：暂停、高水位、强洗，工作寄存器清零通过SB2、SB3设定水位与方式，C置0，按SB1启动进水，到达规定水位，关进水，开始洗涤C=0,则N=4;C≠0，则N=2是强洗？电机正转8秒电机正转2秒暂停2秒暂停5秒电机反转8秒电机反转2秒暂停2秒暂停5秒满N次吗？满N次吗？排水，至水排空甩干10秒M+1;M=3吗？报警提示10秒关机.