资源描述：
《薄板用压铆标准件》由会员上传分享，免费在线阅读，更多相关内容在工程资料-天天文库。
1、PEM自扣紧紧固件一一螺母系列:PEM自扣紧螺母(S,SS,SPTM,SLTM,SMPS,H,HN,HNL,CLS,CLSS,CLA)PEM自扣紧螺母(S,SS,SP,H,HN,HNL,CLS,CLSS,CLA)CL系列一般用于铝，钢，不锈钢和可塑性材料的薄板。CL系列已有50多年牛产历史，解决了因为薄板而不能攻丝的难题，得到全球制造商的普遍认可和使用。安装简单快速，不需要太多经验和太高的操作技术。坚硬连锁安装后产生强大阻拉力和抗扭转力。EPEM商标碳钢S.SS、不锈钢CLS.CLSS自扣紧螺母公制计量单位：mm螺纹尺寸X螺距型号螺纹型号紧固件代号A
2、Max最小板厚安装孔尺寸+0.08CMaxE±0.25T±0.25最小边距碳钢不锈钢M2X0.4SCLSNSM200.770.8-14.254.226.31.54.810.97121.381.4M2.5X0.45SCLSM2.500.770.8-14.254.226.31.54.810.97121.381.4M3X0.5SCLSM300.770.8-14.254.226.31.54.810.97121.381.4M3.5X0.6SCLSM3.500.770.8-14.754.737.11.55.610.97121.381.4M4X0.7SCLSM40
3、0.770.8-15.45.387.926.910.97121.381.4M5X0.8SSCLSSM500.770.8-16.46.388.727.110.97121.381.4M6X1SCLSM601.151.2&75&7211.054.08&611.381.422.212.3M8X1.25SCLSNSM811.381.410.510.4712.655.479.722.212.3M10X1.5SCLSM10NS12.212.311413.9717.357.4813.523.053.18铝制自扣紧螺母CLA公制计量单位:mm型号不锈钢底端编码代号XM
4、aA最小板厚安装孔尺寸+0.08amCXET52•o+-最小边距LACNsM2189•o—4.25224.35•84.283•1A1.4CLAM3189•o1734.326283•1A1.4AC189•o1H835.117.296.283•1A1.4M4X0.7CLAM410.98165.977.937.121.381.4M5X0.8CLAM5NS10.9817.57.479.53.87.921.381.4M6X1CLAM6NS11.381.48.758.7211.054.088.622.212.32.087.0913・120•125钢制，自锁和非自
5、锁螺纹螺母H,HN,HNL公制计量单位：mm螺纹尺寸X螺距类型螺纹型号AMaX最小板厚安装孔尺寸+0.13CMaxE±0.25T1±0.13T2±0.25孔距C/L边缘的最短距离非锁紧自锁紧非自锁自锁紧M6X1NAHNLM61.481.488.75&7212.7510M8X1.25NAHNLM81.481.4810.510.4714.66.311M10X1.5HHNHNLM101.481.4812.712.6716.57.912PEM300®;自扣紧螺母适用于不锈刚•型号SPTM公制计量单位：mm螺纹尺寸X螺距型号螺纹型号底端编码代号安装:小板厚孑半
6、c+0.08MaE±0.T±0.2小255边距M2X0.50.760.8-14.254.226.31.54.810.971.01-1.3921.371.4Min・M4X0.700.760.8-1SPM410.971.01-1.395.45.387.926.921.371.4Min.M5X0.800.760.8-1SPM510.971.01-1.396.46.388.727.121.371.4Min.M6X1spM611.371.4Min・&75&7211.14.18.6三叉戟自扣自锁螺母•型号SLTM公制计量单位:mm螺纹尺寸X螺距型号螺纹型号底端编
7、码代号AMax.最小板厚安装孔尺寸+0.08CMax.E±0.25T±0.25最小边距M3X0.5SLM310.9814.254.226.31.54.821.381.4M3.5X0.6SLM3.510.9814.754.737.11.55.621.381.4M4X0.7SLM410.9815.45.387.926.921.381.4M5X0.8SLM510.9816.46.38&727.121.381.4M6X1SLM611.381.48.75&7211.054.088.622.212.3超薄板专用自扣紧螺母•型号SMPSTM公制计量单位：mm螺纹尺
8、寸X螺距型号螺纹型号AMax.最小板厚安装孔尺寸+0.08CMax.E±0.25T±0.25最小边距M2.5
