《GBT10895-2004-离心机分离机机械振动测试方法》.pdf

《《GBT10895-2004-离心机分离机机械振动测试方法》.pdf》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、ICS73.120J77中华人民共和国国家标准GB/T10895-2004代替GB/T10895-1989离心机分离机机械振动测试方法Centrifugeandseparator-Measurementmethodofmechanicalvibration(ISO10816-1:1995,Mechanicalvibration-Evaluationofmachinevibrationbymeasurementsonnon-rotatingparts-Part1:Generalguidelines,NEQ)2004-06-09发布2004-12-01实施中华人民共和国国家质量监督检验检疫总局

2、发布中国国家标准化管理委员会GB/T10895-2004目次前言·······································································································。·····⋯⋯m1范围·..................................................................................................................12规范性引用文件···························

3、·······················。···································⋯⋯。·.⋯⋯13术语和定义····································································································⋯⋯14测试仪器··········································。··································。···························⋯⋯25被测离心机、分离

4、机的安装························································.··.··..·.·..·..·..·..·....⋯⋯26测试方法·····································································。··································⋯⋯27记录内容与测试报告····································································....·..·..·..·....

5、.⋯⋯4附录A(资料性附录)机械振动测试报告·········································.....·..·..·..·..·....⋯⋯5附录B(资料性附录)离心机分离机机械振动的评价准则·..........................................6附录C(资料性附录)运行限值·····························。···，·················.·..·.....·..·..·.........⋯⋯8参考文献···········································

6、·································································⋯⋯9GB/T10895-2004.舀J..目‘~月q吕本标准非等效采用国际标准ISO10816-1;1995《在非旋转部件上测量和评价机器的机械振动》。本标准代替GB/T10895-1989《离心机分离机机械振动测试方法》.本标准与GB/T10895-1989相比主要变化如下:—规范了一些术语，如将“速度有效值”修改为“速度均方根值”;—修改了振动烈度的定义;—增加了离心机和分离机机械振动的评价准则(附录B)的内容;—增加了有关振动限值(附录C)的内容。本标准

7、的附录A、附录B、附录C为资料性附录.本标准由中国机械工业联合会提出.本标准由全国分离机械标准化技术委员会归口。本标准起草单位:合肥通角机械研究所。本标准主要起草人:赵扬、席莹本、徐径、王明珠。本标准所代替标准的历次版本发布情况为:-GB/T10895-1989.GB/T10895-2004离心机分离机机械振动测试方法1范围本标准规定了在离心机和分离机非旋转部件上测试该机振动的方法。本标准适用于振动频率在10Hz-100