3、的各项参数，还有轴的设计以及其它主要零件的校核。最后，是其它结构的设计，如圆锥齿轮的设计，导轨的设计。另外，文章还有关于机床的维护和检修，以及机床的工作特点、加工要求及技术要求。关键词:钻头;气缸; 斜齿轮;夹紧装置;轮轴ABSTRACT吉林工商学院本科毕业论文Abstaract:Designed primarily designed for machine work, processing claim and technology for automatic to a carpenter or a drill
4、, theoverall and local, internal and external structure of the design.This article from the material analysis, the process of analysis to determine the process, technique. By analyzing the machine tools made holes in the course of action, in accordance with
5、the transmission of the job requirements and gradually be driven. the more craft solutions, the plan or design requirements and tasks of reference of the existing equipment and associated documents to the preliminary design of machine tools of local and the
6、overall structure layout. To the parameter to determine if the processing, the motor of the technical parameters has chosen the cylinder and electrical components, most of the parameter, and the design and other major component of the nuclear. finally, are o
7、ther structural design, such as a cone gear design. In addition, there is still on the machine maintenance and repair work, and machine tools, processing requirement and demand.Key word: Drill;Cylinder;Helical gear;Fixture;Axle吉林工商学院本科毕业论文目录中文摘要 ...........
