YD 5071-1998 传真存储转发业务网工程验收规范

《YD 5071-1998 传真存储转发业务网工程验收规范》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、中华人民共和国通信行业标准传真存储转发业务网工程验收规范CodeforAcceptanceofServiceNetworkforFaxStoreandForwardYD5071一981998北京关于发布(传真存储转发业务网工程验收规范》的通知信部〔19981723号各省、自治区、直辖市邮电管理局，各计划单列市局，中国邮电电信总局，中国联合通信有限公司，邮电部设计院，邮电部北京设计院，中国通信建设总公司:现将《传真存储转发业务网工程验收规范》(编号:YD5071一98)发布，自199!〕年2月1日起施行。本规

2、范由部综合规划司负责解释、修订、监督执行，由北京邮电大学出版社负责组织出版发行。中华人民共和国信息产业部www.17j一九九八年十一月三日www.17bwww.17jwww.3x8目次1总则···············，·························，···················一(1)2单点测试····。·······1，，····················，····，·····，·⋯(2)2.1通电测试前的检查·························，·，

3、······⋯⋯(2)2.2硬件测试·，··································，···，········一(3)2.3系统测试···，，·················。················，·‘····⋯⋯(3)3全网测试·...........................................................(10)3.1全网测试的目的·....................................·一(10)3.2全网

4、测试的原则‘····，，，，····，，，，·，，······一(10)3.3测试的内容·····，····································⋯⋯(10)4初验测试，········，······，··，，，，·······，，，·········，·····⋯⋯(11)4.1初验的目的················，·‘······················⋯⋯(11)4.2初验的原则···········，·4·，··········，，，·，，······一(11

5、)4.3初验的要求·············，·········，·············，···⋯⋯.(11)4.4初验的方法·············，···················。······⋯⋯(11)4.5初验的内容·········，···············-‘···，，，··‘···一(12)5试运行····，。·······，················，······，········，，·····⋯⋯(13)6竣工验收·······，，，，··············

6、····················，··⋯⋯(14)6.1竣工技术文件···············，······，·········，，·····⋯⋯(14)6.2验收的要求和内容·································⋯⋯(15)附录A验收检查表····，······⋯⋯‘·····················一(16)附录B本规范用词说明······，··，···········，，，·，，·‘·⋯⋯(21)附加说明·························

7、·······，···················，···⋯⋯(22)条文说明···················，，，··，‘···‘·····，····，····，······，，一(23)总则1.0.1本规范是传真存储转发业务网安装工程施工质量检验、随工检验和竣工验收等工作的技术依据，适用于新建工程和扩建工程。改建工程可参照执行。1.0.2本规范未包括的内容和指标要求，应按国家有关规定及工程合同等的要求执行。当本规范与国家标准及规范有矛盾时，应以国家标准和规范为准。1.0.3在施工过程中，应严格

8、进行随工检验工作。1.0.4在特殊情况下，执行本规范有困难时，建设单位应充分论述理由，并提供报告呈上级主管部门审批。1.0.5竣工验收工作应执行原邮电部《邮电通信建设工程竣工验收办法》的有关规定，验收项目和方法按本规范办理。1.0.6随着工程中新技术的不断运用，本规范应进行补充完善。www.17jwww.17bwww.17jwww.3x82单点测试2.1通电测试前的检查2.1.，机房温度、湿度和电源电压应符合下列