YDT 5093-2000 光缆线路自动监测系统工程验收暂行规定

《YDT 5093-2000 光缆线路自动监测系统工程验收暂行规定》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、中华人民共和国通信行业标准光缆线路自动监测系统工程验收暂行规定InterimProvisionsforAcceptanceofOpticalFiberCableAutomaticMonitoringSystemFogineeringYD/T5093一20002000北京关于发布《光缆线路自动监测系统工程验收暂行规定》的通知信部规〔2000)668号各省、自治区、直辖市邮电管理局，中国电信集团公司，中国移动通信集团公司，中国联通公司，中国网通公司，中国吉通公司，信息产业部邮电设计院，信息产业部北京邮电设计院，中国通信建设总公司:现将(光缆线路自动监测系统工程验收暂行规定》(编号:YD/T

2、5093一2000)发布，自2000年10月1日起施行。本规定由部综合规划司负责解释、修订、监督执行，由北京邮电大学出版社负责组织出版发行。中华人民共和国信息产业部=000年七月十三日目次1总则·..............................................................(1)2设备安装······················································⋯⋯(2)2.1槽道、列柜安装·······································⋯⋯(2)2.2机架安装········

3、········································⋯⋯(2)2.3子架安装················································⋯⋯(3)3缆线的布放··················································⋯⋯(4)3.1敷设电缆及光纤连接线······························⋯⋯(4)3.2编扎光纤连接线·······································⋯⋯(4)4设备检查及本机测试··················

4、·····················⋯⋯(5)4.1通电前的检查··········································⋯⋯(5)4.2硬件通电检查··········································⋯⋯(5)4.3软件功能检查··········································⋯⋯(6)4.4本机测试················································⋯⋯(6)4.5光器件介人测试·······，·，······················

5、·······⋯⋯(7)5系统性能测试及功能检查·································⋯⋯(8)5.1数据连接传递测试···································⋯⋯(8)5.2系统性能测试检查····································⋯⋯(8)6系统管理··········，··········································⋯⋯(11)7竣工验收······················································⋯⋯(13)7.

6、1竣工技术文件·····································⋯⋯(13)7.2随工检验和竣工验收··············.·············⋯⋯(14)附录A本规定用词说明··················.···············⋯⋯(17)附加说明························································⋯⋯(18)条文说明··············，········································⋯⋯(19)1总则1.0.1(光缆线路自动监测系统

7、工程验收暂行规定》(以下简称“本规定”)是光缆线路自动监测系统(以下简称“监测系统”)工程施工质量检验、随工检验和竣工验收的依据。本规定适用于长途光缆干线的线路自动监测系统工程，对于中继网、接人网的光缆线路自动监测系统工程竣工验收可参照本规定执行。1.0.2本规定没有规定的工程验收指标和要求应按照相关技术体制、标准、设计规范和工程的设计文件确定。当本规定与国家标准及规范有矛盾时，应以国家标准及规范为准。1.0.3在施工过程中，建设单位应严格执行