欢迎来到天天文库
浏览记录
ID:23628316
大小:792.32 KB
页数:25页
时间:2018-11-09
《GB-T13850-1998 交流电量转换为模拟量或数字信号的电测量变送器》由会员上传分享,免费在线阅读,更多相关内容在行业资料-天天文库。
1、ICS17.220.20N22中华人民共和国国家标准GB/T13850-1998idtIEC688:1992交流电量转换为模拟量或数字信号的电测量变送器Electricalmeasuringtransducersforconvertinga.c.electricalquantitiestoanalogueordigitalsingals1998一07一28发布1999一05一01实施国家质kk技刁C监督局发布cB/T13850-1998目次前言······················································
2、·················,··············,···························⋯⋯IIEC前言·····················。····················································································⋯⋯l引言·..................................................................................................
3、.....................m1范围·····‘··············,··,,···················,····”········,,········,·甲·,,····,.····“‘,········一12引用标准·····································································································⋯⋯13定义·...........................................
4、.........................................................................14等级指数、基本误差的允许范围、辅助电源和参比条件··,·················,···········。···············⋯⋯55要求········.·············”,················································································⋯⋯76试验...............
5、·····.................................................................................................g7标志········,··········................................................................................................17附录A(提示的附录)参考资料···”,···············,···,.···············
6、··················,······,·⋯⋯,,,⋯20附录B(提示的附录)引用的国际标准译文索引······················································⋯⋯20GB/'r13850-1998前言本国家标准等同采用国际标准IEC688《交流电量转换为模拟量或数字信号的电工测量变送器》(第二版1992年)及其1997年第1号修订。本标准将代替GB/丁13850.1^-13850.2-92(交流电量变换为直流电量的电测量亦送器》。本标准与原国家标准GB/T13850.1^-13850.2-
7、92相比具有以下特点:1)分类合理,将变送器分为三个使用组别,变送器的参比条件、标称使用范围与使用组别有关,便于用户选型;2)大幅度放宽了温度的参比范围,其中I组:20'C,230C、或27℃士I'C;I组:15-30'C;19组:。~45'C。而在原国家标准中,温度的参比范围分别为:20'C.230C、或27℃士11x(0.1-0.5级)和士2'C(1^2.5级).这一改变提高了变送器的性能;3)简化了变送器模拟输出信号(电压、电流)的可选值,规定4mA-20mA是优选值,增加了数字信号输出;4)对功率因数引起的改变量做了明确规定;5)增加了温升试
8、验;6)对于GB/T13850中一些“由用户与厂家协商”的技术要求做出了明确规定;7)加入对IEC688第1
此文档下载收益归作者所有