欢迎来到天天文库
浏览记录
ID:22992967
大小:312.00 KB
页数:12页
时间:2018-11-02
《加工中心精度检验规范方案》由会员上传分享,免费在线阅读,更多相关内容在应用文档-天天文库。
1、NO.¯¯¯日沛電腦配件(上海)有限公司RIPEIcomputeraccessory(Shanghai)Co.,Ltd.加工中心精度检验規範机型:MODEL机号:SERIALNO.目录CATALOGUE1.0静态精度检查.................................................6页PAGESTATICACCURACYINSPECION2.0定位精度检查.................................................1页PAGEPOSITIONACCURACYINSPECTION3.0重复精度检查.........
2、........................................1页PAGEREPETITIONALACCURACYINSPECTION4.0循圓精度........................................................1页PAGEPALLETACCURACY5.0附件………………………………………..页PAGEACCESSARY共...................................................................页PAGE中國上海松江區新橋鎮申港路3636號No.3636She
3、nggangRoad,XinQiaoSongjiangShanghaiChina核准者CONFIRMED检验者CHECKED检验日期DATEMCVF01S001Q301000003940331-71.0静态精度STATICACCURACYINSPECTION单位Unit:mm项次NO检查项目Inspectionitem测试方法图Measuringmethoddiagram许可差Permissibledeviation实际测量值Measuredvalue1.1床台X轴方向运动之真直度StraightnessoftheXaxismovementa.X-Z面内0.06/1000b.Y-Z面内
4、1.2床台Y轴方向运动之真直度StraightnessoftheYaxismovementa.X-Z面内0.06/1000b.Y-Z面内1-1单位Unit:mm项次NO检查项目Inspectionitem测试方法图Measuringmethoddiagram许可差Permissibledeviation实际测量值Measuredvalue1.3床台X轴方向之运动与其上面之平行度ParallelismbetweenmovementinXaxisdirectionandtableuppersurfaceX≦5000.02500<X≦8000.025800<X≦12500.031250<X≦
5、20000.041.4床台Y轴方向之运动与其上面之平行度ParallelismbetweenmovementinYaxisdirectionandtableuppersurfaceY≦5000.02500<Y≦8000.025800<Y≦12500.031250<Y≦20000.041.5X轴方向运动与床台基准沟侧面之平行度ParallelismbetweenmovementinXaxisdirectionandSidesurfaceoftablereferenceslot每300mm的量测距离下许可差为0.015mm0.015forameasuringlengthof3001-2单位
6、Unit:mm项次NO检查项目Inspectionitem测试方法图Measuringmethoddiagram许可差Permissibledeviation实际测量值Measuredvalue1.6各轴方向相互运动之直角度PerpendicularityBetweenmovementinXaxisdirectionandYaxisdirectionandZaxisdirectiona.X-Y轴Place0.012/300b.X-Z轴Place0.012/300c.Y-Z轴Place0.012/3001.7主轴中心线与床台面之直角度Perpendicularitybetweencent
7、erlineofmainspindleandtablesurface.旋径每300Per3000.0151-3单位Unit:mm项次NO检查项目Inspectionitem测试方法图Measuringmethoddiagram许可差Permissibledeviation实际测量值Measuredvalue1.8主轴孔内面之偏摆Runoutofspindletaperhole固定端Atspindlesideendoftestbar0.005固定
此文档下载收益归作者所有