欢迎来到天天文库
浏览记录
ID:15073890
大小:39.28 KB
页数:6页
时间:2018-08-01
《进料抽样检验标准---五金材料类》由会员上传分享,免费在线阅读,更多相关内容在行业资料-天天文库。
1、上海百廷通信科技股份有限公司機密等級:機密BTControlledDocumentConfidentialLevel:ConfidentialDocumentTitle(文件名稱):SamplingStandardforIncomingInspectionofMetalPart(進料抽樣檢驗標準/五金材料類)DocumentNumber(文件編號):BT-QR-008--A1Revision(文件版本):A0ReviseDate:27/07/2011Preparedby(撰寫者):韩新梅Createbywhic
2、hUnit(制定單位):QA上海百廷通信科技股份有限公司目录Contents1.目的:Purpose2.范围:Scope3.权责:Responsibilty4.作业规定要点:Detailoperatingprocedure上海百廷通信科技股份有限公司1.目的:Purpose订定进料检验项目及抽样标准,以做为进料检验之标准。Tosetupincomingmaterialinspectionitemsandsamplingstandard,toassuretheincominginspection.2.范围Scop
3、e:所有一般进料之五金类材料,包括所有螺丝、螺帽、冲压、压铸及其电镀、皮膜、表面涂装、组立、LeadFrame及开模之金属件等之五金件。AlloftheincomingmetalpartincludeScrew,Nut,allstamping,die-castingandelectroplatewiperandassemblyetc.3.权责Responsibilty:IQC须依进料抽样检验标准作时料检验,QA可适品质状况呈检验单位主管同意后作检验项目及抽样数之更改。IQCinspectorsaccording
4、totheincomingsamplingplanningtoinspect,QAengineerscanaccordingtothematerialqualitytochangetheinspectionitemsandsamplingplanningbeforedepartmentmanageragreement.4.作业规定要点:Detailoperatingprocedure:4.1.抽样计划:QA可因应实际情况不同,调整相关抽样计划,经QA主管同意后实行。SamplingPlan:Baseonthed
5、ifferentsituation,siteQAcouldrevisethissamplingplanandgettheapprovalbysiteQAheadbeforeimplement4.1.1正常检验:AQL0.65%,LevelI。(ForAutomotivePartRequirement:AQL0.4%S-3,)Regularinspection:AQL0.65%,LevelI(ForAutomotivePartRequirement:AQL0.4%S-3)4.1.2外观检验:AQL0.65%,Le
6、velI。(ForAutomotivePartRequirement:AQL0.4%S-3)Visualinspection:AQL0.65%,LevelI.(ForAutomotivePartRequirement:AQL0.4%S-3)4.1.3.尺寸检验:以每批抽5pcs量測,以0/1判定。如客戶或QA有需求才執行Dimensioninspection:0/1arbitrationbasedon5pcs(BaseonrequestofCustomerorQA)4.1.4.焊锡性检验:以3PCS检验,0/1
7、判定。(须经后续焊锡作业者,得执行之)(如客戶或QA有需求才執行)Solderinginspection:0/1arbitrationbasedon3pcs。Performit,ifthesematerialsneedpost-solderingprocess.(BaseonrequestofCustomerorQA)4.1.5.黏着度试验:每批3PCS,0/1判定。(ForAutomotivePartRequirement)如客戶或QA有需求才執行上海百廷通信科技股份有限公司Glue-adhesiontest
8、:3pcs/perincominglot.0/1adjudgement.(BaseonrequestofCustomerorQA)(ForAutomotivePartRequirement)4.1.6.硬度试验:每批3PCS,0/1判定。(ForAutomotivePartRequirement)如客戶或QA有需求才執行Hardnesstest:3PCS/perincominglot.
此文档下载收益归作者所有