MHT6030-2003行李传送车.pdf

《MHT6030-2003行李传送车.pdf》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、ICS49.100V57MH中华人民共和国民用航空行业标准MH/T6030-2003行李传送车Self-propelledconveyer-beltloader2003一10一22发布2004一01一01实施中国民用航空总局发布MH/T6030-2003目次范围·················································································································⋯⋯1规范性引用文件甲·...................................

2、..................................................................1术语和定义··································································............................................1要求································································································，·········

3、·····⋯⋯2试验方法·······················，·······················，，······················································⋯⋯5检验规则·····。············································································。·························⋯⋯7标志、运输、储存·························，························

4、································，·············⋯⋯8MH/T6030-2003nil舀本标准由中国民用航空总局机场司提出。本标准由中国民用航空总局航空安全技术中心归口。本标准起草单位:上海东方航空设备制造公司。本标准主要起草人:黄冠宏、陈静、张杰、高天。MH/T6030-2003行李传送车范围本标准规定了行李传送车(以下简称传送车)的技术条件、试验方法、检验规则、标志、运输及储存本标准适用于为货舱门槛高度在1200.3500mm之间的各种类型飞机服务的传送车。2规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。凡是

5、注日期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件，其最新版本适用于本标准。GB1495汽车加速行驶车外噪声限值及测量方法(neqISO362:1998,ISO844:1994)GB/T1496机动车辆噪声测量方法GB/T3766液压系统通用技术条件(MODISO4413:1998)GB4785汽车及挂车外部照明和信号装置的安装规定(eqvECENo.48:1995)GB7258-1997机动车运行安全技术条件GB/T12469-1990焊接质量保证钢熔化

6、焊接头的要求和缺陷分级GB/T12544汽车最高车速试验方法GB/T12547汽车最低稳定车速试验方法GB/T12673汽车主要尺寸测量方法GB/T12674汽车质量(重量)参数测定方法GB12676-1999汽车制动系统结构、性能和试验方法(eqvECE13,ISO7634:1995,ISO6597:1991,ISO7635:1991)GJB150.3军用设备环境试验方法高温试验GJB150.4军用设备环境试验方法低温试验GJB150.9军用设备环境试验方法湿热试验QC/T484汽车油漆涂层QC/T625汽车用涂镀层和化学处理层QC/T29104专用汽车液压系统液压油固体污

7、染度限值(neqISO4406)QC/T29105.4专用汽车液压系统液压油固体污染度测试方法显微镜颗粒计数法AHM"910飞机地面支持设备基本要求AHM915标准控制装置术语和定义下列术语和定义适用于本标准。行李传送车self-propelledconveyer-beltloader装卸行李、包裹等散件货物的机动传送设备。1)AHM全称为IATAAIRPORTHANDLINGMANUAL22chEDITION,MH/r6030-20034要求4.1总则4门，传送车应按照规定程序批准的图样及技术文件制造