GA534-2005脉冲气压喷雾水枪通用技术条件.pdf

《GA534-2005脉冲气压喷雾水枪通用技术条件.pdf》由会员上传分享，免费在线阅读，更多相关内容在行业资料-天天文库。

1、ICS13.220.10C8361:1中华人民共和国公共安全行业标准GA534-2005脉冲气压喷雾水枪通用技术条件Generalspecificationsforimpulseairpressurespraygun2005-03-17发布2005-10-01实施中华人民共和国公安部发布GA534-2005目次前言·.......................................................................................................................Il

2、1范围···············································································································⋯⋯12规范性引用文件······························································，····················，·········，·，，·⋯13术语和定义·················································

3、······················，····················，·········⋯⋯14分类与型号···································································································⋯⋯25技术要求·，·····························，·············，，·············，··············，，·········，，，···············⋯⋯26试验方

4、法·..............................................................................................................47检验规则····································································································⋯⋯78标志、包装、运输、贮存····················，······················，···

5、···，··············，，······················，⋯⋯79使用说明书························································，·······················，········，··············，，，，8GA534-2005前言本标准的5.1,5.2,5.3,5.4,5.5,5.6为强制性条文，其余为推荐性条文。由于脉冲气压喷雾水枪没有国际标准，根据国内目前脉冲气压喷雾水枪生产、使用情况及现有的技术水平，同时考虑到脉冲气压喷雾水枪的发展趋

6、势制定了本标准。脉冲气压喷雾水枪灭火性能试验方法参照GB4351-1997《手提式灭火器通用技术条件》，同时根据脉冲气压喷雾水枪的实际使用情况，在灭火性能试验方法与试验结果评定上作了修改和验证。本标准由中华人民共和国公安部消防局提出。本标准由全国消防标准化技术委员会第四分技术委员会归口。本标准起草单位:公安部上海消防研究所。本标准主要起草人:史兴堂、金桦、吴志强。本标准委托公安部上海消防研究所解释。GA534-2005脉冲气压喷雾水枪通用技术条件1范围本标准规定了脉冲气压喷雾水枪的术语和定义、分类与型号、技术要求、试验方法、检验规则、标志、包装、运输、贮

7、存和使用说明书等。本标准适用于脉冲气压喷雾水枪。2规范性引用文件下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件，其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准，然而，鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本凡是不注日期的引用文件，其最新版本适用于本标准。GB/T3280-1992不锈钢冷轧钢板GB/T3323-1987钢熔化焊对接接头射线照相和质量分级GB/T4237-1992不锈钢热轧钢板GB4351-1997手提式灭火器通用技术条件GB8109-1987推车式灭火器性能要求和试验方法GB/

8、T14975-2002结构用不锈钢无缝钢管GB/T14976-2002流体输送用