中天三建质量管理标准化木模板工程做法

《中天三建质量管理标准化木模板工程做法》由会员上传分享，免费在线阅读，更多相关内容在工程资料-天天文库。

1、编号名称建筑工程木模板工程施工标准版本试行版生效期建筑工程木模板工程施工标准编制：审核：批准：-12-编号名称建筑工程木模板工程施工标准版本试行版生效期建筑工程木模板工程施工标准（试行版）一材料···························································································3二木模板施工流程图········································································4三施工图标准化···················

2、···························································5四模板集中加工··············································································5五楼板支模····················································································6六梁支模·························································

3、······························9七剪力墙支模··················································-12-编号名称建筑工程木模板工程施工标准版本试行版生效期······························10八柱子支模···················································································15九楼梯支模······················································

4、·····························18十后浇带······················································································21十一二次结构···················································································23十二实测实量·············································································

5、······25-12-编号名称建筑工程木模板工程施工标准版本试行版生效期1材料要求1.1模板建议采用廊坊大地或廊坊五棵松覆膜黑板，廊坊五棵松915*1830覆膜黑板价格大约73元/张，廊坊大地覆膜黑板价格大约80元/张。1.2加固用内楞龙骨建议采用40（50）*90*3000进口方木或40*60*3.0方管。对没有压光处理的方木进场后应进行压刨处理，做到尺寸准确，外形平直，长期周转使用变形较小，价格大约为2050~2500元/立方。1.3支模架钢管必须采用3.0mm厚以上钢管；顶托直径不得小于36，顶托建议采用U型托板。2木模板施工流程图图纸深化设计、工人交底加工车间设置、加工定位放线

6、、找平验线支模架搭设、抄水平梁底板铺设检查楼板铺设检查-12-编号名称建筑工程木模板工程施工标准版本试行版生效期柱、剪力墙、楼梯定位、支模验收3施工图标准化3.1模板施工图标准化是以单构件（单构件指单个墙体、单块平板、单个梁等构件）为单位，绘制构件模板支撑体系及配模图，汇总配料清单。主要包括以下三个方面：a、墙体模板加工图：墙体每面均有立面图，并显示与梁板之间的结合关系，标注模板规格、螺杆间距、木方规格尺寸及间距、钢管规格及间距、顶托距离梁板的距离及离地的距离、墙体支撑体系设置等。b、梁模板加工图：绘制梁模板平面图、立面图、断面图，标注模板规格、螺杆间距、加固体系、支撑体系、梁侧板与墙柱

7、、平台板关系等。c、楼板模板加工图：绘制楼板模板平面图，木方平面图并标注间距、支撑体系平面图、立面图并标注间距，标注模板规格尺寸等。标准层平板配模图平板A块配模详图3.2对所有平板、梁、墙板、柱分别进行详细配模，然后把各种型号的模板进行编号、统计，形成模板配料单。4模板集中加工4.1通过模板图纸标准化形成的模板配料单、方木配料单，对所有梁、板模板按部位进行下料，对非标板材进行了统筹利用实现作业面模板的统一下料和集中领用和提高了模板安