ip flow-ordering external流量统计配置.pdf

《ip flow-ordering external流量统计配置.pdf》由会员上传分享，免费在线阅读，更多相关内容在应用文档-天天文库。

1、目录1IP流量排名配置命令···························································································································1-11.1IP流量排名配置命令··························································································································1-11.1

2、.1displayipflow-orderingstatistic······························································································1-11.1.2ipflow-ordering·······················································································································1-21.1.3ipf

3、low-orderingstat-interval···································································································1-2i1IP流量排名配置命令1.1IP流量排名配置命令1.1.1displayipflow-orderingstatistic【命令】displayipflow-orderingstatistic{external

4、internal}[

5、{begin

6、exclude

7、include}regular-expre

8、ssion]【视图】任意视图【缺省级别】1：监控级【参数】external：显示外部接口的IP流量排名统计信息，只统计接口入方向的总流量。internal：显示内部接口的IP流量排名统计信息，统计接口入方向和出方向的流量。

9、：使用正则表达式对显示信息进行过滤。有关正则表达式的详细介绍，请参见“基础配置指导”中的“CLI”。begin：从包含指定正则表达式的行开始显示。exclude：只显示不包含指定正则表达式的行。include：只显示包含指定正则表达式的行。regular-expression：表示正则表达式，为1～256个字符的字符串，区分大小写。【

10、描述】displayipflow-orderingstatistic命令用来显示IP流量排名统计信息。【举例】#显示内部接口的IP流量排名统计信息。displayipflow-orderingstatisticinternalUnit:kilobytes/secondUserIPTOTALINTOTALOUTTCP-INTCP-OUTUDP-INUDP-OUTICMP-INICMP-OUT192.168.1.10.20.10.10.10.00.00.10.0192.168.1.20.10.00.10.00.00.00.00.0192.1

11、68.1.30.00.00.00.00.00.00.00.0表1-1displayipflow-orderingstatistic命令显示信息描述表字段描述Unit:kilobytes/second单位：千字节/秒UserIP用户IP地址TOTALIN入方向流量总数TOTALOUT出方向流量总数TCP-IN入方向TCP报文数TCP-OUT出方向TCP报文数1-1字段描述UDP-IN入方向UDP报文数UDP-OUT出方向UDP报文数ICMP-IN入方向ICMP报文数ICMP-OUT出方向ICMP报文数1.1.2ipflow-ordering【命令】ipfl

12、ow-ordering{external

13、internal}undoipflow-ordering【视图】接口视图【缺省级别】2：系统级【参数】external：作为外部接口统计流量，只统计接口入方向的总流量。internal：作为内部接口统计流量，统计接口入方向和出方向的流量。【描述】ipflow-ordering命令用来使能IP流量排名功能，并指定流量统计方式。undoipflow-ordering命令用来恢复缺省情况。缺省情况下，接口不对流量进行统计。【举例】#配置接口Ethernet1/1作为外部接口进行IP流量排名统计。sys

14、tem-view[Sysname]interfaceethernet1/1[Sy