1、安装VERITAS NetBackupEnterPriseServer5.1一、安装阶段1.在安装NetBackupEnterPriseServer5.1前,应确认把DELLPV132T磁带库硬件安装好,并通过光纤连接到DELL光通道交换机上,重启SAN存储网络中的服务器,应能在操作系统下检测到两个磁带驱动器和一个机械手(安装驱动程序)。本次我们将master server安装在SAN网络中的服务器上(DBSRV1)2.将安装盘放至光驱,将自动启动引导界面.3.双击SETUP,并选择接受软件授权协议.4.进入Netbackup License Key And Serv
2、er Type 在License Key中输入License,此时左边三个按钮同时变为可操作方式。5.点击NetBackup master server。6.选择typical方式安装 => NEXT7.Netbackup System Names => 输入Master Server Name(dbsrv1) => NEXT8.输入Global Device Database Host Name =>Dbsrv1--可以跟Master Server Name相同。9.点击Install开始安装。10.开始复制和安装NetBackup主程序.11.安装完成后将提示是
5、 右击该主机=>Properties...=>Media => Allow media overwrite中的选项全部打勾。该功能使以上选项中的格式进行覆盖,存入VERITAS 能识别的磁带数据。2.4Netbackup Administration Console=>Media and Device Management=>Device Monitor 在Drive Name 栏双击该设备名,出现该设备的详细信息,确保该设备为UP状态(默认),如果是DOWN状态,可以在Drive Name栏右击鼠标=>UP Drive。当该
6、设备已经运行了备份后,可以在 Netbackup Administration Console=>Netbackup Management=>Reports=>Media lists=> Media Logs => Media Summary 查看该设备的运行信息。2.5 配置存储单元a. 点击Netbackup Administration Console=>Netbackup Management=>Storage Unitsb. 在管理器的右边区域,点击鼠标右键,选择Add a New Storage Unitc. 输入Unit name (disk/tape
7、)d. d.1>配置磁盘备份单元:d.1.1 General Properties=>Storage Unit type =>diskd.1.2 Storage Unit type Properties=>Absolute Pathname to directoryd.1.3 输入要备份的磁盘目的路径,点击确定 d.2>配置磁带备份单元:d.2.1 General Properties=>Storage Unit type =>Media Managerd.2.2 Storage Unit type Properties=>Density选